I put a new carb on and after the choke opens up all the way, the engine won't idle. I don't think I have the idle too low. This is a rebuilt carb I just installed. The engine ran fine before installing the new carb. Any advise.
Thanks
Buggy won't idle after warming up
Moderator: Ken
3 posts
• Page 1 of 1
Buggy won't idle after warming up
by Rick Leddon » 05 Mon Mar, 2007 9:04 pm
- Rick Leddon
- Buggy Nut
- Posts: 53
- Joined: 31 Sat Dec, 2005 2:18 pm
by Tom Kathleen » 05 Mon Mar, 2007 9:49 pm
Vacuum leak? Is it a 34 PCIT? If so, the idle shut off selenoid may not be working. These are just the "easy" reasons for no idle. TOM
- Tom Kathleen
- Buggy Nut
- Posts: 42
- Joined: 12 Mon Jun, 2006 8:44 pm
- Location: Vernon, CT
by David O' » 05 Mon Mar, 2007 11:41 pm
Check the setting on the side of the carb and see if they are right, or you have a possible intake manifold leak.
If at first you don't succeed, beat the pshaw out of the business partner, and then go at it alone! LOL!
- David O'
- Buggyholic
- Posts: 391
- Joined: 01 Sat Oct, 2005 11:10 am
- Location: Dallas, Texas
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 28 guests