by GregR » 24 Mon Dec, 2012 4:09 pm
Best way is to remove the windshield. I assume you have a Manx or a clone with one of Dino's windshield/frames.
There should be 2 bolts on each side you can reach from under the dash and just lift it off.
They're usually tight enough that they won't flop over, but as a precaution you might have someone close to steady it until you come out from under the dash and both of you lift it to a safe place.
Once removed, there are 2 small screws (1 on each side) that conect the bottom rail to teh rest of the frame and holds the glass in. Remove that and you're done.
GregR