Texas Manx Club

A Place for "Texas Dune Buggy" nuts! 2

Skip to content

cylinder 3 not firing

Chassis & Electrical. Ask a question, share your knowledge, build it right.

Moderator: Ken

Post a reply

cylinder 3 not firing

Postby jordanj » 02 Thu Apr, 2009 8:08 pm

What would be the common causes of this? i checked the exhaust pipe and it was still cool to the touch,while the other 3 were hot.
User avatar
jordanj
Buggy Nut
 
Posts: 43
Joined: 07 Sat Feb, 2009 10:20 pm
Location: Victoria,Tx
Top

Postby Don » 03 Fri Apr, 2009 7:17 am

Check for spark and if that's good it's probably a valve. You can check the compression to confirm.
1967 Dune Buggy - aka Shrek
User avatar
Don
Buggy Nut
 
Posts: 180
Joined: 06 Mon Aug, 2007 7:55 pm
Location: Pearland
Top

Postby Jack Duncan » 03 Fri Apr, 2009 9:07 am

Also, check plug wire to that cylinder for continuity from the distributor to the plug. Carbon wires sometimes break. :)
White Bandit
User avatar
Jack Duncan
Buggyholic
 
Posts: 343
Joined: 16 Tue Sep, 2008 11:06 pm
Location: Boerne, TX
Top
Post a reply

Return to Technical Talk

Who is online

Users browsing this forum: No registered users and 29 guests

Powered by phpBB® Forum Software © phpBB Group
cron